Updated November 2026
The urnex rinza milk frother cleaner is aliquid-style detergent designed to dissolve the milk fats and proteins that build up inside frothers, steam wands and pitchers. Used correctly, it keeps foam tasting clean and helps prevent sour, stale notes in your next latte. This guide walks through preparation, soaking, rinsing and how often to run it.
What Rinza Does and When to Use It
Milk residue hardens quickly once it dries, and it can carry an off smell into every drink that follows. Rinza is formulated for this exact job, so it works best as a routine step rather than a rescue after buildup has already formed. Owners often report that a regular cleaning schedule makes the difference between a mild film and a stubborn crust that needs scrubbing.
Shopping for one? See our guide: 7 Best Milk Frothers and Steamers for Home Use (2026).
How to Clean a Frother with Urnex Rinza
Always follow the dilution and contact time printed on the product label, since the exact ratio can vary by product version. Manufacturers generally recommend a diluted solution rather than undiluted product poured straight into the chamber. The steps below apply to most jug and electric frothers.
- Empty the frother and rinse the pitcher or chamber with cool water to remove loose milk.
- Mix the Rinza solution in warm water at the dilution listed on the label. Stir until fully dissolved.
- Pour the solution into the frother or pitcher, filling only to the level shown on the label.
- Run the frothing cycle or let the solution sit for the recommended soak time, usually a few minutes.
- Discard the solution and rinse thoroughly with clean water two or three times.
- Wipe the outside, check the whisk or magnetic stirrer, and let all parts air dry.
Cleaning a Steam Wand
For a steam wand, purge it briefly to clear milk from the tip, then wipe it with a damp cloth. Soak the tip in the diluted solution for the time specified on the label, then purge again with clean steam to clear any remaining liquid. Keep the wand away from skin while purging.
Dilution, Frequency and Rinsing
Use a measuring cup rather than estimating, since too much concentrate can leave a residue of its own. Clean after every session if you froth daily, and at least once a week for light use. Rinse until the water runs clear and carries no soapy scent, because leftover detergent will affect the flavor of your next drink.
| Use Pattern | Suggested Cleaning Frequency |
|---|---|
| Multiple drinks daily | After each session, plus a deep clean weekly |
| A few drinks per week | After each use with a weekly soak |
| Occasional use | After each use and a deep clean monthly |
Common Mistakes
- Using undiluted product, which can leave residue and affect taste.
- Skipping the rinse, so detergent ends up in your milk.
- Letting milk dry on the wand or chamber before cleaning.
- Soaking parts that the manufacturer says should not be submerged.
- Ignoring the label’s contact time and cutting it too short.
Recommended Gear
- Urnex Rinza: the core product for dissolving milk residue in frothers and steam wands. View on Amazon
- A small measuring cup: helps you mix the dilution accurately every time. View on Amazon
- A soft cleaning brush: reaches into the whisk and steam wand tip without scratching surfaces. View on Amazon
For more on keeping your frother in good shape, see How to Clean a Milk Frother and Steam Wand and Milk Frother Machine Guide: How to Choose and Use One.
FAQ
Can I use urnex rinza milk frother cleaner in every type of frother?
Most jug and electric frothers accept it, but you should check your manufacturer’s instructions first. Some parts may not be suitable for soaking or certain cleaning agents.
How often should I clean my frother with Rinza?
Clean after each use if you froth daily, and do a deeper soak at least once a week. Lighter users can stretch this to a monthly deep clean.
Do I need to rinse after using Rinza?
Yes. Rinse several times with clean water until no soapy smell or taste remains, since leftover cleaner can affect your drinks.
Conclusion
Using urnex rinza milk frother cleaner at the right dilution and on a steady schedule keeps milk residue from building up. Follow the label for contact time, rinse thoroughly and let parts dry fully. With that routine, your foam will taste fresher from one drink to the next.

