Updated November 2026
A coffee scale for Chemex lets you weigh your coffee grounds and water so every pot tastes the same. Once you measure by weight instead of scoops, you can repeat a recipe exactly and adjust one variable at a time. This guide covers what to look for in a scale and how to brew a Chemex with it.
Why Weight Beats Scoops for Chemex Brewing
Volume measurements shift with grind size and how tightly you pack a scoop. Two scoops of fine grounds can weigh noticeably more than two scoops of coarse grounds. A scale removes that variable, so a 30 g dose is always 30 g. Most Chemex recipes are written by weight for this reason.
Shopping for one? See our guide: OXO Conical Burr Coffee Grinder with Integrated Scale: 7 Best Picks (2026).
What to Look for in a Scale
For pour-over, you need a scale that reads in 0.1 g increments and responds quickly as you pour. Look for these features:
- Fine resolution: 0.1 g steps let you measure small doses accurately.
- A built-in timer: You can track bloom and total brew time without a second device.
- A flat, stable platform: A wobbly surface gives jumpy readings.
- Tare function: It resets to zero so you can weigh the grounds, then the water, in one vessel.
- A water-resistant top: Splashes and drips are common during a pour.
How to Brew a Chemex with a Scale
A common starting recipe for a 6-cup Chemex uses about 50 g of coffee and 800 g of water, a ratio near 1:16. Adjust from there based on taste.
- Place the Chemex with a rinsed filter on the scale and tare to zero.
- Add 50 g of medium-fine grounds to the filter.
- Start the timer and pour about 100 g of water evenly over the grounds to bloom them. Wait 30 to 45 seconds.
- Pour in slow, circular motions until the scale reads about 300 g.
- Wait for the water level to drop slightly, then pour up to 500 g, then up to 800 g.
- Aim for a total brew time of roughly 3:30 to 4:30, then remove the filter and serve.
Dialing In Your Recipe
Change only one thing at a time. If the cup tastes sour and thin, try a finer grind or a longer contact time. If it tastes bitter or harsh, try a coarser grind or a slightly lower water temperature. Keep notes on the dose, water weight, grind setting and time so you can repeat what works. For more on this, see our guide to Coffee Scale with Timer: How to Brew Consistent Coffee Every Time.
Recommended gear
A scale with a built-in timer makes the bloom step easier to repeat. A consistent grinder matters just as much as the scale, since uneven grounds undercut even perfect weighing. Read Coffee Grinder for Chemex: How to Choose and Set Up One for Clean Brews before you choose a grinder. A related read: Hand Washing vs Vinegar Soak: How to Clean Reusable Coffee Filters (2026).
- A pour-over scale with a built-in timer helps you track bloom and total brew time together. View on Amazon
- A conical burr grinder gives a more even particle size than blade grinders for pour-over brewing. View on Amazon
- Bonded paper filters sized for Chemex pots keep the brew clean and free of sediment. View on Amazon
Common Mistakes
- Forgetting to tare after placing the Chemex on the scale.
- Pouring water directly onto the filter walls instead of the grounds, which can cause uneven extraction.
- Using a scale that reads in whole grams, which makes small dose changes hard to track.
- Changing grind, dose and time all at once, so you cannot tell which change helped.
- Skipping the filter rinse, which can leave a papery taste in the cup.
FAQ
Do I need a scale with a timer for a Chemex?
It is not required, but a timer makes it easier to hit your bloom and total brew times. A separate phone timer works fine if your scale lacks one.
What coffee-to-water ratio should I start with?
A ratio around 1:16 is a common starting point for a Chemex. Adjust the grind and ratio based on how the cup tastes.
Can I use a kitchen scale instead of a coffee scale?
Yes, if it reads in 0.1 g steps and has a tare function. A dedicated coffee scale usually adds a timer and a more responsive display.
Conclusion
A coffee scale for Chemex turns brewing into a repeatable process. Weigh your grounds and water, keep a few notes, and change one variable at a time. Within a few brews, you will know exactly how to make the cup you want.

