Updated November 2026
The Krups Fast Touch coffee and spice grinder is a blade-style grinder that chops beans and spices quickly with a single push-button control. This guide explains how to get more even results from it, how to avoid cross-flavor contamination between coffee and spices, and how to keep the grinder working well. The main idea is simple: short, controlled pulses and a clean bowl give you far better consistency than one long run.
Understand what a blade grinder can and cannot do
Unlike a burr grinder, which crushes beans between two surfaces set at a fixed gap, a blade grinder spins sharp blades that strike the beans at random. That means particle size depends mostly on how long you run it. Longer runs produce more fine powder mixed with larger chunks, so you will not get the uniform grind a burr grinder delivers. For background on the difference, see What Is a Burr Grinder for Coffee? How It Works and Why It Matters and Why Is a Burr Grinder Better? Even Grounds for Better Coffee.
Shopping for one? See our guide: Oxo Brew Conical Burr Coffee Grinder: 7 Best Picks Compared (2026).
Step-by-step: grinding coffee with pulses
- Measure beans by weight if you can. A common starting point for drip is about 15 to 17 grams of coffee per 250 grams of water.
- Fill the bowl no more than about two-thirds full so the beans can circulate.
- Put the lid on firmly. Most models will not run safely without it seated properly.
- Press and release in short pulses of roughly one to two seconds. Shake the bowl or tap the side between pulses to redistribute the beans.
- Stop when most of the grounds look like your target: for drip, a sandy texture with few large pieces; for French press, a coarser, more uniform look.
- Pour the grounds out and check them. Sift or tap the bowl to settle the powder before brewing.
Switching safely between coffee and spices
The biggest mistake with a combined coffee and spice grinder is letting spice oils leave a flavor in your coffee, or coffee oils dull your spices. Plan your order and clean between uses.
- Grind coffee first if you care most about coffee, then clean the bowl before spices.
- Wipe the bowl and blades with a dry paper towel or a small brush. Do not rinse the motor base.
- For strongly flavored spices like cinnamon or cloves, run a small handful of plain rice or dry bread through the bowl to pull out residue, then discard it.
- Keep separate bowls if you grind spices often. Many owners find this is the simplest long-term fix.
Getting more consistent results
Because particle size depends on run time, consistency comes from repeatable habits rather than from a dial. Use the same bean weight, the same number of pulses and the same shaking pattern each time. Record what works for your brewing method, then repeat it. If your results still swing widely, the blades may be dull or the bowl may hold too much; both are common causes of uneven output. For a broader look at uneven grinds across different machines, see Why Is My Conical Burr Coffee Grinder Producing Uneven Grounds? Causes and Fixes.
| Brew method | Target texture | Typical approach |
|---|---|---|
| French press | Coarse, even | Few short pulses, check often |
| Drip | Medium, sandy | Moderate pulses with shaking |
| Espresso | Very fine | Not ideal for a blade grinder |
Cleaning and maintenance
Coffee oils build up on the blades and bowl over time, which can make grounds taste stale and affect airflow. Unplug the unit before cleaning. Wipe the blades and bowl after every few uses, and wash removable parts only if the manufacturer’s manual says they are dishwasher- or hand-wash-safe. Never submerge the motor base. Replace the blades if they show visible dulling or chipping, since dull blades produce more heat and more uneven particles.
Recommended gear
- A digital kitchen scale helps you weigh beans so each batch is repeatable. View on Amazon
- A small cleaning brush lets you clear spice residue from the blade area without moisture. View on Amazon
- A separate spice grinder bowl or dedicated spice grinder keeps flavors from mixing. View on Amazon
Common mistakes and tips
- Running one long, continuous grind instead of short pulses, which produces dust and chunks together.
- Overfilling the bowl, so beans never reach the blades evenly.
- Skipping cleaning between coffee and spices, leading to off flavors.
- Grinding by time alone without checking the texture.
- Using the grinder for fine espresso grounds, where a burr grinder works far better.
FAQ
Can I use the Krups Fast Touch for both coffee and spices?
Yes, the bowl and blades handle both, but clean thoroughly between uses to prevent flavor transfer. Many people keep a separate bowl for spices.
How do I get a more even grind?
Use short pulses, shake the bowl between them, and keep the bowl no more than about two-thirds full. Check the grounds and stop when they match your brew method.
How often should I clean the grinder?
Wipe the bowl and blades every few uses and clean more thoroughly when you notice residue or stale flavors. Always follow the manufacturer’s care instructions.
Conclusion
The Krups Fast Touch coffee and spice grinder works best when you control run time with short pulses, weigh your beans, and keep the bowl clean. Good habits matter more here than any setting. Check the official Krups site or your manual for current care guidance and warranty details.

