Updated November 2026
Setting up oxo burr grinder timer settings lets you grind the same dose every time, so your brew tastes consistent from one morning to the next. In this guide, you’ll learn how to program the timer, match it to your brew method, and check the result with a quick test. The process takes only a few minutes once you know what to look for.
Before You Start: What the Timer Controls
On most OXO burr grinders, the timer sets how long the motor runs, which in turn determines how much coffee is ground. Grind time alone doesn’t guarantee a fixed weight, because the beans’ density, roast level and the grind size setting all affect output. For that reason, treat the timer as a starting point and adjust it after you weigh your first batch. The grind size dial, which is separate from the timer, controls particle size and should be set before you touch the timer.
Shopping for one? See our guide: 7 Best OXO Burr Grinder Settings for Espresso: Compared for Home Baristas.
Step-by-Step: Setting the Timer
- Set your grind size first. Choose a coarse setting for French press, a medium setting for pour-over, and a fine setting for espresso.
- Place your brewing vessel or a scale under the grinder and tare it to zero.
- Select a starting timer value. A reasonable baseline for a single 15-gram dose is in the mid-range of the dial, then adjust from there.
- Run one full grind cycle and weigh the output.
- Compare the weight to your target dose. If the grounds are light, add a few seconds. If they are heavy, subtract a few seconds.
- Repeat until two consecutive runs land within about half a gram of each other.
Adjusting for Different Brew Methods
Each brew method needs a different dose, so you’ll need separate timer values for each. Keep a small note on your phone or taped to the grinder with the timer position, grind setting and resulting weight for each method you use.
| Brew method | Typical dose | Grind size | Timer approach |
|---|---|---|---|
| Pour-over | 15–20 g | Medium | Set by weight, then lock |
| French press | 30–60 g | Coarse | Set for your full batch |
| Espresso | 16–18 g | Fine | Re-check after each setting change |
Checking Consistency Over Time
Timer settings drift when beans age, when the burrs wear, or when the room humidity changes. Weigh a dose every few days, especially after switching to a new bag of beans. If your output has crept up or down by more than a gram or two, adjust the timer by a small increment and re-test. For guidance on uneven output, see Why Does My OXO Conical Burr Grinder Produce Uneven Grounds? 6 Causes and Fixes, which covers the mechanical causes that timer tweaks can’t fix.
Common Mistakes to Avoid
- Changing the timer before setting the grind size, which throws off every measurement after.
- Judging the dose by volume or the look of the grounds instead of weighing them.
- Grinding a single test batch and assuming it reflects the setting, when one or two more runs will show the real pattern.
- Ignoring residual grounds left in the chamber from a previous grind, which can skew the next weight.
- Making large timer jumps instead of small, incremental adjustments.
Recommended Gear
A scale that reads to 0.1 gram makes the timer-and-weigh method reliable, since small differences show up clearly. View on Amazon
A soft brush helps clear grounds from the grinder chamber between runs so each weigh-in starts clean. View on Amazon
FAQ
How often should I recalibrate my oxo burr grinder timer?
Check your output with a scale whenever you open a new bag of beans or notice a change in flavor. Many home brewers do a quick weigh-in once a week, which is usually enough to catch drift early.
Do I need to reset the timer if I change the grind size?
Yes, because finer settings often produce a different weight in the same time. Re-test with a scale after any grind size change.
Can timer settings replace weighing my coffee?
No, timer settings only give you a repeatable starting point. Weighing your output confirms that each dose is actually the amount you intended.
Conclusion
The timer on your oxo burr grinder is most useful when you set the grind size first, then dial in the time by weighing real output. Record your settings for each brew method, and recheck them whenever your beans or routine change. With a few careful test runs, you’ll have dependable doses that taste the same day after day.

