Updated November 2026
The taylors coffee strength scale is a numbered guide printed on Taylors of Harrogate coffee packaging to show how intense a blend will taste, from mild to bold. It is a flavor-intensity indicator, not a measure of caffeine content, so a higher number tells you what to expect in the cup rather than how much you will be buzzing.
Why the Strength Scale Matters for Your Brew
Coffee strength is shaped by two things: how much coffee you use relative to water, and the roast and blend character of the beans themselves. A medium roast with a rating near the middle of the scale will taste balanced at a standard ratio, while a darker, bolder blend will feel heavy and bitter if you brew it at the same strength. Reading the scale helps you pick a starting point before you touch the grinder or the kettle.
Shopping for one? See our guide: OXO Conical Burr Coffee Grinder with Integrated Scale: 7 Best Picks (2026).
Factors That Change How Strong Your Cup Tastes
The number on the pack is only a starting reference. Several variables move the final result:
- Dose: More grounds per cup increases body and intensity.
- Water-to-coffee ratio: A common drip starting point is about 55 to 60 grams of water per 10 grams of coffee. Going lower makes a stronger cup.
- Grind size: Finer grounds extract faster and taste stronger, but can turn bitter if over-extracted.
- Brew time: Longer contact with water pulls out more solids.
- Water temperature: Hotter water extracts more aggressively. Many brewing guides suggest roughly 195 to 205 °F.
How to Match Your Brew to the Strength Rating
Start with the scale as a guide, then adjust by taste. Weighing your coffee makes these changes repeatable, and a kitchen scale for coffee is the simplest way to do it. The steps below work well for most drip and pour-over setups.
- Note the strength number on the bag and choose a starting ratio, such as 1:16 (coffee to water by weight).
- Weigh your coffee and water, then brew using a fixed grind size and water temperature.
- If the cup tastes too weak or thin, increase the coffee dose by about 10 percent or shorten the water-to-coffee ratio slightly.
- If the cup tastes harsh or bitter, reduce the dose a little, coarsen the grind, or lower the water temperature.
- Write down what you changed so you can repeat a good result.
For more on measuring accurately, see Kitchen Scale for Coffee: A Step-by-Step Guide to Consistent Brews (2026) and Coffee Scoops and Measuring Coffee Without a Scale. If you brew in a machine, Programmable Coffee Makers: Timers, Strength Settings and Keep-Warm Plates explains how built-in strength settings work.
What We’d Use
A reliable scale with a timer makes it easy to track dose and brew time across each cup, which is the fastest way to test how the strength rating translates to your taste.
- Coffee scale with timer: Useful for tracking dose, water weight and brew time together. View on Amazon
- Kitchen scale with 0.1 g resolution: Good for weighing small doses precisely. View on Amazon
FAQ
Does a higher number on the taylors coffee strength scale mean more caffeine?
No. The scale describes flavor intensity and roast character. Caffeine content depends mainly on the bean type and the amount of coffee used, so check with the manufacturer if caffeine level matters to you.
Should I use the same ratio for every Taylors blend?
Not necessarily. Lighter, brighter blends often taste better with a slightly higher water ratio, while bolder blends may need less coffee. Adjust in small steps and taste after each change.
What if my coffee tastes bitter even at a low strength setting?
Bitterness usually points to over-extraction, such as a grind that is too fine or water that is too hot. Try a coarser grind first. If you have ongoing taste or equipment concerns, a local coffee equipment specialist can help you troubleshoot.

